What?? Porcupine?? It all started when my son was in first grade. Being known as the parent that could never say “no”, I was asked to chair the costume committee for the first grade play. We were given a t-shirt and baseball cap to match the color of each character. The characters ranged from cats to ducks and even a few squirrels. My son was lucky enough to be chosen to play the hedgehog. AKA porcupine. It didn’t seem like it would be an easy costume to make.
After much thought and a trip to the craft store, my plan for the Porcupine Costume came together. I purchased several pages of 8 1/2 by 11 foam sheets. They can be found in most craft stores and come is a variety of colors. I choose black, brown, tan, and mustard/clay colors. Using a paper cutter I cut the sheets into 8 1/2 by 1/4 inch strips. I layed the t-shirt down so that the back was facing upward. I placed a piece of cardboard inside the shirt to keep the glue from seeping through. Using the hot glue gun I began to glue the strips to the back of the shirt, so that they were sticking out/upward. Make sure to start at the edge of the sleeves so that they are covered with the strips as well. The hot glue gun works very well because it dries fast. I left about 1/4 inch between the strips and was sure to alternate the colors.
Once the entire back of the shirt was complete, I then covered the hat with the same strips. It turned out to be fun and easy. The costume was such a hit that I had to make one for my other son. Just a tip.. Make sure that the t-shirt is a little oversized. Once you have finished the gluing and all is dry, you can cut a slit in the t-shirt hem and run a piece of elastic through it. This really adds to the effect. You can also use any old dark colored spray paint to dust the front of the shirt giving it an uneven colored effect. I am now the proud mom of two adorable porcupines.
I hope you have as much fun with this as we did!!